 |
|
|
|
|
 |
EGX-360 |  |
|
|
|
| A quick guide to tools for specialist engraving | |
 |
A gray square indicates a tool is included with the EGX-360 |
 |
A black square indicates a tool that must be purchased separately |
| TOOLS FOR METAL ENGRAVING | ||||||||
|
|
|||||||
 |
 |
|||||||
| ZDC-A4000 Diameter 4.36 mm, included item |
4.36 mm diameter, included item | |||||||
| TOOLS FOR GLASS ENGRAVING | ||||||||||||||
|
|
|
|
|
||||||||||
 |
 |
|
|
 |
||||||||||
| Included item | Included item | Diameter 3.175 mm, included item | ZDC-A2000R Diameter 3.175 mm, optionally available |
ZB-20 Optionally available |
||||||||||
| TOOLS FOR RING ENGRAVING (INSIDE) | ||||||||||
|
|
|
||||||||
 |
 |
 |
||||||||
| ZRC-36 Optionally available |
ZTH-36 Optionally available |
ZDC-N8000 Optionally available |
||||||||
| TOOLS FOR GLASS ENGRAVING | ||||||||||||
|
|
|
|
|||||||||
|
|
|
|
|||||||||
| Diameter 3.175 mm, included item | ZDC-A2000 Diameter 3.175 mm, optionally available |
ZRC-36 Optionally available |
ZB-20 Optionally available |
|||||||||
| Item | Modeling number | Description |
| Engraving cutters (for plastic) | ZEC-A2013 | Cemented carbide dia. = 3.175 x 114 (L) x 0.127 (W) |
| ZEC-A2025 | Cemented carbide dia. = 3.175 x 114 (L) x 0.254 (W) | |
| ZEC-A2051 | Cemented carbide dia. = 3.175 x 114 (L) x 0.508 (W) | |
| ZEC-A2076 | Cemented carbide dia. = 3.175 x 114 (L) x 0.762 (W) | |
| ZEC-A4013 | Cemented carbide dia. = 4.36 x 165 (L) x 0.127 (W) | |
| ZEC-A4025 | Cemented carbide dia. = 4.36 x 165 (L) x 0.254 (W) | |
| ZEC-A4051 | Cemented carbide dia. = 4.36 x 165 (L) x 0.508 (W) | |
| ZEC-A4076 | Cemented carbide dia. = 4.36 x 165 (L) x 0.762 (W) | |
| Engraving cutters (for aluminium or brass) | ZEC-A2013-BAL | Cemented carbide dia. = 3.175 x 114 (L) x 0.13 (W) |
| ZEC-A2025-BAL | Cemented carbide dia. = 3.175 x 114 (L) x 0.25 (W) | |
| ZEC-A4013-BAL | Cemented carbide dia. = 4.36 x 165 (L) x 0.13 (W) | |
| ZEC-A4025-BAL | Cemented carbide dia. = 4.36 x 165 (L) x 0.25 (W) | |
| Parallel engraving cutters (for plastic) | ZEC-A2150 | Cemented carbide dia. = 3.175 x 114 (L) x 1.52 (W) |
| ZEC-A2190 | Cemented carbide dia. = 3.175 x 114 (L) x 1.91 (W) | |
| ZEC-A2230 | Cemented carbide dia. = 3.175 x 114 (L) x 2.29 (W) | |
| ZEC-A2320 | Cemented carbide dia. = 3.175 x 114 (L) x 3.175 (W) | |
| ZEC-A4150 | Cemented carbide dia. = 4.36 x 165 (L) x 1.52 (W) | |
| ZEC-A4190 | Cemented carbide dia. = 4.36 x 165 (L) x 1.91 (W) | |
| ZEC-A4230 | Cemented carbide dia. = 4.36 x 165 (L) x 2.29 (W) | |
| ZEC-A4320 | Cemented carbide dia. = 4.36 x 165 (L) x 3.175 (W) | |
| ZEC-A4380 | Cemented carbide dia. = 4.36 x 165 (L) x 3.81 (W) | |
| ZEC-A4430 | Cemented carbide dia. = 4.36 x 165 (L) x 4.34 (W) | |
| Quarter round cutters (for plastic) | ZEC-A2013-QR | Cemented carbide dia. = 3.175 x 114 (L) x 0.13 (W) |
| ZEC-A2025-QR | Cemented carbide dia. = 3.175 x 114 (L) x 0.25 (W) | |
| ZEC-A4013-QR | Cemented carbide dia. = 4.36 x 165 (L) x 0.13 (W) | |
| ZEC-A4025-QR | Cemented carbide dia. = 4.36 x 165 (L) x 0.25 (W) |
dia = shank diameter, L = overall length, W = blade width, unit = mm
| Item | Modeling number | Description |
| Diamond engraving cutters | ZDC-A2000 | Diamond dia. = 3.175 x 127 (L) |
| ZDC-A4000 | Diamond dia. = 4.36 x 178 (L) Only operates with the ZC-E436 collet |
|
| Square end-mill | ZHS-100 | High speed steel dia. = 1 3 (l) x 6 (d) x 50 (L) x 2NT |
| ZHS-200 | High speed steel dia. = 2 6 (l) x 6 (d) x 50 (L) x 2NT | |
| ZHS-300 | High speed steel dia. = 3 10 (l) x 6 (d) x 50 (L) x 2NT | |
| ZHS-400 | High speed steel dia. = 4 12 (l) x 6 (d) x 50 (L) x 2NT | |
| ZHS-500 | High speed steel dia. = 5 15 (l) x 6 (d) x 55 (L) x 2NT | |
| ZHS-600 | High speed steel dia. = 6 15 (l) x 6 (d) x 55 (L) x 2NT | |
| Ball end-mill | ZCB-150 | Cemented carbide R1.5 25(l)x 2.4(Lc) x 65(L) x 6(d) x 2NT |
| ZCB-200 | Cemented carbide R2 25(l) x 3.2(Lc) x 70(L) x 6(d) x 2NT | |
| ZCB-300 | Cemented carbide R3 30(l) x 4.8(Lc) x 80(L) x 6(d) x 2NT |
dia = flute diameter, R = flute radius, l = flute length, Lc = blade length,
L = overall length, d = shank diameter, NT = number of flute, unit = mm
L = overall length, d = shank diameter, NT = number of flute, unit = mm
| Item | Model number | Description |
| Collets for end-mill | ZC-23 | Diameter 6mm, 5mm, 4mm, and 3mm collets: 1 pc. each |
| ZC-23-3 | Diameter 3 mm collet: 1 pc. | |
| ZC-23-4 | Diameter 4 mm collet: 1 pc. | |
| ZC-23-6 | Diameter 6 mm collet: 1 pc. | |
| ZC-23-3175 | Diameter 3.175 mm collet: 1 pc. | |
| ZC-23-6.35 | Diameter 6.35 mm collet: 1 pc. | |
| Collet for ZDC-A4000 | ZC-E436 | Diameter 4.36 mm collet: 1 pc. |
| Nose cone | ZDN-200 | Inner diameter 2mm outer diameter 4.2mm for engraving text |
| Spindle unit | ZS-35 | |
| Adhesive sheet for securing material | AS10 | 210 mm x 140 mm (8-1/4 in. x 5-1/2 in.), 10 sheets |
dia = flute diameter, R = flute radius, l = flute length, Lc = blade length,
L = overall length, d = shank diameter, NT = number of flute, unit = mm
