 |
|
|
|
|
 |
CAMM-1PRO GX- 300 |  |
|
|
|
| Model | GX-300 |
| Mechanism / Driving method | Friction feed / Digital control servo motor |
| Maximum cutting area | Width: 737 mm (29 in.) Length: 24998 mm (984-1/8 in.) |
| Acceptable media widths | Min. 50 mm (2 in.)/Max. 915 mm (36 in.) (50 to 540 mm (2 in. to 21 in.), 582 to 915 mm (23 in. to 36 in.)) |
| Width of material that can be cut off |
0 to 812 mm (0 in. to 32 in.) |
| Tools | Special blade for CAMM-1 series |
| Maximum cutting speed | During cutting: 850 mm/sec. (in all directions) During tool-up: 1202 mm/sec. (in 45 direction) |
| Cutting speed / Blade force |
10 to 850 mm/sec. (in increments of 10 mm/sec.) / 20 to 350 gf |
| Mechanical resolution | 0.0125 mm/step (0.000492 in./step) |
| Software resolution | 0.025 mm/step (0.000984 in./step) |
| Distance accuracy (*1) |
Error of less than ± 0.2% of distance traveled, or 0.1 mm (0.00394 in.), whichever is greater |
| Repetition accuracy (*1) (*2) (*3) | 0.1 mm or less |
| Interface | Serial (RS-232C-compatible), USB (Rev 1.1) |
| Replot memory |
2 MB (buffer size: 8 MB) |
| Power supply / Power consumption | AC 100V to 240V ±10% 50/60 Hz 1.1A / Approx. 95W |
| Dimensions with stand | 1144 mm (W) x 727 mm (D) x 1113 mm (H) (45-1/16 in. (W) x 28-5/8 in. (D) x 43-13/16 in. (H)) |
| Weight with stand | 44 kg (97 lb.) |
| Included items | Power cord, blade holder (XD-CH2), pin, blade, alignment tool, cable clamp, replacement blade for sheet cutter, USB cable, Roland software CD-ROM, setup guide, user's manual |
| Price: | R37 314.47 Ex VAT |
| Due to the current uncertainty in the exchange rate, product prises can not always be updated fast enough on this website. Please check all product prises with our sales people first. | |
