| Printing technology |
Piezoelectric inkjet |
| Media |
Width |
260 to 1,371 mm (10.3 to 54 in.) |
| Thickness |
Maximum 1.0 mm (39 mil) with liner, for printing
Maximum 0.4 mm (15 mil) with liner, for cutting |
| Roll outer diameter |
Maximum 180 mm (7 in.) |
| Roll weight |
Maximum 30 kg (66 lb.) |
| Core diameter |
50.8 mm or 76.2 mm (2 in. or 3 in.) |
| Printing / cutting width*1 |
Maximum 1,346 mm (53 in.) |
| Ink cartridges |
Type |
Roland ECO-SOL MAX INK |
| Capacity |
220 cc or 440 cc |
| Colors |
six colors (cyan, magenta, yellow, black, white and metallic silver) or five colors (cyan, magenta, yellow, black and white) |
| Printing resolution (dots per inch) |
Maximum 1,440 dpi |
| Cutting speed |
10 to 600 mm/s (10 to 300 mm/s in media-feed direction) |
| Blade force |
30 to 300 gf |
| Blade offset |
0.000 to 1,500 mm (0 to 0.0591 in.) |
| Software resolution (when cutting) |
0.025 mm/step (0.000984 in./step) |
| Distance accuracy (when printing)*2 *3 |
Error of less than ±0.3% of distance traveled, or ±0.3 mm, whichever is greater |
| Distance accuracy (when cutting)*3 |
Error of less than ±0.4% of distance traveled, or ±0.3 mm, whichever is greater
When distance correction has been performed (when the setting for [CUTTING MENU] - [CALIBRATION] has been made):
Error of less than ±0.2% of distance traveled, or ±0.1 mm, whichever is greater |
| Repeatability (when cutting)*3 *4 |
±0.1 mm or less |
| Alignment accuracy for printing and cutting*3 *5 |
±0.5 mm or less |
| Alignment accuracy for printing and cutting when reloading media*3 *6 |
Error of less than ±0.5% of distance traveled, or ±3 mm, whichever is greater |
| Dryer unit*7 |
Heating type, setting range for the preset temperature: 30 to 55°C (86 to 130°F) |
| Ink-fixing device*7 |
Print heater/preheater, setting range for the preset temperature: 30 to 50°C (86 to 122°F) |
| Connectivity |
Ethernet (10BASE-T/100BASE-TX, automatic switching) |
| Power-saving function |
Automatic sleep feature |
| Power requirements |
AC 100 to 120 V ±10%, 13 A, 50/60 Hz or AC 220 to 240 V ±10%, 7 A, 50/60 Hz |
| Power consumption |
During operation |
Approx. 1,600 W |
| Sleep mode |
Approx. 47 W |
| Dimensions (with stand) |
2694 (W) x 1103 (D) x 1260 (H) mm (106 (W) x 43.4 (D) x 49.6 (H) in.) |
| Weight (with stand) |
197 kg (434.3 lb.) |
| Environmental |
Power on |
Temperature: 15 to 32°C (59 to 90°F) [20°C (68°F) or more recommended], Humidity: 35 to 80% (no condensing) |
| Power off |
Temperature: 5 to 40°C (41 to 104°F), humidity: 20 to 80% (no condensing) |
| Included items |
Stand, power cord, blade, blade holder, media clamps, replacement blade for separating knife, cleaning kit, software RIP, user's manual, etc. |
|
| *1 |
The length of printing or cutting is subject to the limitations of the program or driver. |
| *2 |
Using Roland specified media, print travel of 1m, temperature: 25°C (77°F), humidity: 50 %RH |
| *3 |
Not assured when the print heater or dryer is used. |
| *4 |
Using Roland specified media, loaded on the shaft, [PREFEED] menu item must be set to "ENABLE," with 25 mm or more for both right and left margins and 35 mm or more front margin, excluding expansion or contraction of the media. Media 610 mm wide or over and 4,000 mm long. Media 610 mm wide or less and 8,000 mm long. |
| *5 |
Provided that media length is under 3,000 mm. Temperature: 25°C (77°F). Excluding possible shift caused by
expansion/contraction of the media and/or by reloading the media. |
| *6 |
Using Roland specified media, data size: 1,000 mm in the media-feed direction, 1,346 mm in the carriage-movement direction. No lamination. Automatic detection of crop marks at 4 points when media is reloaded. During cutting,[PREFEED] menu item must be set to "ENABLE." Temperature: 25°C (77°F).
Excludes the effects of slanted movement and of expansion and contraction of the media. |
| *7 |
Warm-up is required after powerup. This may require 5 to 20 minutes, depending on the operating environment.
The preset temperature may fail to be reached depending on the ambient temperature and media width. |
| Heater and Blower (DU-540) Specifications |
| Dryer unit*8 |
Heating type (with blower fan), setting range for the preset temperature: 30 to 55°C (86 to 130°F) |
| Power requirements*9 |
AC 100 to 120 V ±10%, 5 A, 50/60 Hz or
AC 220 to 240 V ±10%, 3 A, 50/60 Hz |
| Power consumption |
Approx. 650 W |
| Dimensions including printer |
2,694 (W) x 1,210 (D) x 1,260 (H) mm (106-1/8 (W) x 47-11/16 (D) x 49-5/8 (H) in.) |
| Weight including printer |
217 kg (478.3 lb.) |
|
*8
|
Warm-up is required after powerup. This may require 5 to 20 minutes, depending on the operating environment.
The preset temperature may fail to be reached depending on the ambient temperature and media width. |
| *9 |
Be sure to check the breaker capacity and use separate power-outlets for the printer and the dryer. |
| Roland VersaWorks System Requirements |
| Operating system |
Windows Vista® Ultimate Service Pack 1 or Business Service Pack 1 (32-bit edition),
Windows Vista® Ultimate or Business (32-bit edition), or Windows XP Professional
Service Pack 2 or 3, or Windows® 2000 Service Pack 4
|
| CPU |
Pentium 4, 2.0 GHz or faster recommended |
| RAM |
1 GB or more recommended (Windows Vista® : 2GB or more recommended) |
| Video card and monitor |
A resolution of 1,280 x 1,024 or more recommended |
| Free hard-disk space |
40 GB or more recommended |
| Optical drive |
DVD-ROM drive |
|
| Application software compatible with Cutting and Print&Cut |
| Adobe® Illustrator® 10, CS, CS2, CS3 / CorelDRAW® 11, 12, X3 |
|
[Page top]
|
|
